Konica Minolta Network Setup Network Setup Manual page 23

4 Changing the Device Setup
If you are using NDS (NetWare 4.x or 5.x):
1. Put a check mark into the
2. Click the
shows a list of NDS trees on the NetWare network.
3. Select the NDS tree you want to setup as the print server, and then
click the
OK
4. Click the
shows a list of NDS contexts for the tree you selected.
5. Select the NDS context to setup the print server, and then click the
button.
OK
6. When everything is the way you want, click the
Note
• If you are logged on to the NetWare network without supervisor
privileges, the NetWare login screen will appear after you finish
configuring the setup. If this happens, type in the supervisor login
name and password, and then click OK.
18
NetWare 4.x NDS Context
button to display the
button.
button to display the
dialog box, which
Mode Select
dialog box, which
Mode Select
Next
check box.
button.