Maintaining; Cleaning The Tv Cabinet; Cleaning The Tv Screen; Troubleshooting - Insignia NS-46E570A11 User Manual

3 Press to highlight Settings.
USB
Photos
Browse Photos
Favorite Photos
View Slideshow
Settings
OK
MOVE
ENTER
Change slideshow settings
4 Press OK/ENTER or . The Settings menu opens.
USB
Photos Settings
Repeat
Shuffle
Speed
Transition
OK
MOVE
ENTER
Repeat the slideshow when it reaches the end
5 Press to highlight a setting, then press
to adjust the setting. You can select:
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
• Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 2 Sec, 4 Sec, 6 Sec,
or 8 Sec.
• Transition—Selects a transition effect when
moving to the next file in the slideshow. You
can select None, Fade to Black, Vertical
Wipe, Horizontal Wipe, or Random.
6 Press EXIT to close the menu.
38
NS-42E570A11/NS-46E570A11 Insignia 42"/46" LED-LCD TV, 120Hz 1080p
PICTURE AUDIO CHANNELS SETTINGS
SELECT PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
On
Off
4Sec
None
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com

Maintaining

• Do not use your TV in areas that are too hot or too
USB
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
screen or cabinet with the cloth. Use a clean cloth to
USB
dry the screen or cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Troubleshooting

Warning
Do not try to repair your TV yourself. Refer all service
to a qualified service technician.
or
Problem
Power
No power
Remote control
Remote control does not work
Remote control code cannot be
detected by a universal remote
Solution
• Make sure that the power cord is correctly
connected to your TV and a power outlet.
See"Connecting the power" on page 10.
• Unplug the power cord, wait 60 seconds,
then plug the cord back in and turn on
your TV.
• Make sure that there are no obstructions
between the remote control and the
remote control sensor on the front of your
TV.
• Clean the remote sensor on the front of
your TV.
• Bright or fluorescent lighting may
interfere with the remote control signal.
Turn off the light or move your TV.
• Replace the batteries. Make sure that the
+ and – symbols on the batteries align
with the + and – symbols in the battery
compartment. See "Installing remote
control batteries" on page 8.
• Purchase a separate learning remote
control.
• Go to www.insigniaproducts.com for a list
of remote control codes.