Customizing Slideshow Settings; Maintaining; Cleaning The Tv Cabinet; Cleaning The Tv Screen - Insignia NS-40L240A13 User Manual

Customizing slideshow settings

You can customize the slideshow settings,
including Repeat, Shuffle, Speed, and Transition.
To customize slideshow settings:
1 Switch to USB mode. See
mode" on page 42. The Photos menu opens.
Photos
Browse Photos
Favorite Photos
View Slideshow
Settings
OK
Move
ENTER
View files from a USB device that is connected to the TV.
2 Press or to highlight Settings, then press
ENTER. The Photos · Settings menu opens.
Photos Settings
Repeat
Shuffle
Speed
Transition
OK
Move
ENTER
Repeat the slideshow when it reaches the end.
3 Press or to highlight an option, then press
ENTER. You can select:
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
• Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4 Sec, 6 Sec, or
8 Sec.
• Transition—Selects the way photos transition
when moving to the next file in the slideshow.
You can select:
• None—No transition effect.
• Fade to Black—Fades the screen to black
between photos.
• Vertical Wipe—Wipes the screen from left
to right between photos.
• Horizontal Wipe—Wipes the screen from
top to bottom between photos.
• Random—Randomly selects a transition
effect.
4 Press EXIT to close the menu.
44
"Switching to USB
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Select Previous
Exit
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
6sec
None
Select
Previous Exit
MENU
EXIT
www.insigniaproducts.com

Maintaining

• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Troubleshooting

Warning
On
On
Do not try to repair your TV yourself. Contact
authorized service personnel.

Video and audio

Problem
Picture does not fill the
screen. There are black bars
around the picture.
No picture (screen is not lit)
and no sound.
NS-40L240A13 Insignia 40" 1080p LCD TV
Solution
• Change the aspect ratio. An increasing amount
of digital TV and movies are presented in wide
screen (16:9). See "Aspect ratio
page 24.
• Press on the TV or the remote control.
• Make sure that the Audio Only option is set to
Off. See "Playing TV audio
• Make sure that the video cables are connected
securely to your TV.
• Adjust the contrast and brightness. See
"Adjusting the TV picture" on page 23.
• Make sure that the power cord is plugged in.
• Make sure that the correct video input source is
selected. See "Selecting the video input
on page 21.
• Try another channel. The station may be
experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
"Connecting a cable or satellite
or "Connecting an antenna or cable TV (no
on page 12.
• Check the closed caption settings. Some TEXT
modes can block the screen.
options" on
only" on page 27.
source"
box" on page 9
box)"