Adjusting Component Video - Insignia NS-46E570A11 User Manual

Insignia 42"/46" LED-LCD TV, 120Hz 1080p
• Overscan—Adjusts the picture's
reproduction rate. You can select On or
Off. Overscan is set to off when viewing a
computer's image to show the full image
on your TV.
Note
The Overscan option is only available in digital TV,
Component, and HDMI modes.
• Color Temperature—Selects the color
temperature to change the overall color of
the picture. You can select Cool, Normal,
or Warm.
• Noise Reduction—Controls video noise.
You can select Off, Low, Middle, or High.
• Insignia Motion 120 Hz—Eliminates
motion blur to provide clear detail and
smooth motion. You can select:
• Off—Disables Insignia Motion 120 Hz.
• Low—Sets Insignia Motion 120 Hz effect
to minimum (default).
• Medium—Provides smooth and clear
picture motion for normal use.
• High—Eliminates motion blur with clear
detail and smooth motion.
• 24p film mode—Provides smooth and
clear motion from film-based video.
Note
• If you notice a ghosting type effect (or other
artifact) in some content, artifact, select LOW.
• For certain gaming applications, select Game
mode or turn off the Insignia Motion 120Hz in
the Advanced Video menu.
• If the Game mode is turned On, Insignia
Motion 120Hz will be set to Off automatically.
• Backlight—Controls the overall brilliance
of the screen. You can adjust the backlight
through a range of 0 ~ 30.
• Advanced Contrast—When you see the
pop-up menu, set Adaptive Contrast to
On to adjust picture detail and brightness
automatically or to set Dynamic Contrast
Ratio to On to automatically adjust the
contrast between the light and dark areas
of the picture.
• Reset Picture Settings—Resets all picture
settings to the factory defaults. When you
select this option, a confirmation box opens.
Press or to select Yes or No, then press
OK/ENTER to confirm.
3 Press or to adjust the option, or press
to select a setting.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.

Adjusting component video

To adjust component video:
1 Press MENU. The on-screen menu opens.
2 Press
3 Press
or
4 Press
5 Press MENU to go to the previous menu or press
www.insigniaproducts.com
Note
This setting is available only when the video input
source is set to Component and your TV is receiving
a component signal.
PICTURE
Picture
Mode
Brightness
Contrast
Color
Tint
S h a p r n e s s
OK
MOVE SELECT
MENU
ENTER
Adjust settings to affect picture quality
or to highlight SETTINGS. The
Settings menu opens.
PICTURE
Settings
Parental Controls
Closed Caption
Time
Menu Settings
Auto Input Sensing
Input Labels
OK
MOVE SELECT
MENU
ENTER
Set various TV options
to highlight Component Settings, then
press OK/ENTER or . The Component Settings
screen opens.
PICTURE
Settings
Component Settings
Phase
Reset Component Settings
OK
MOVE SELECT
MENU
ENTER
Minimizes horizontal distortion
or to highlight an option, then press
or to adjust the option. You can select:
• Phase—Minimizes horizontal distortion.
(0 ~ 100)
• Reset Component Settings—Resets
component settings to the factory defaults.
EXIT to close the menu.
AUDIO CHANNELS SETTINGS USB
Energy Savings
50
48
70
0
0
PREVIOUS EXIT
EXIT
SETTINGS
AUDIO CHANNELS USB
On
PREVIOUS EXIT
EXIT
SETTINGS
AUDIO CHANNELS USB
50
PREVIOUS EXIT
EXIT
17