Making Connections; Connecting The Power; Connecting An Antenna Or Cable Tv (No Box); Connecting A Cable Or Satellite Box - Insignia NS-46E570A11 User Manual

Making connections

Connecting the power

To connect the power:
• Plug the power cord into a power outlet.

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):
1 Turn off your TV and all connected equipment.
2 Connect a coaxial cable to the ANT/CABLE IN
jack on the back of your TV and to the antenna
or cable TV wall jack.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
10
NS-42E570A11/NS-46E570A11 Insignia 42"/46" LED-LCD TV, 120Hz 1080p

Connecting a cable or satellite box

ANT/CABLE IN
www.insigniaproducts.com
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available.
Connection type Video quality
HDMI Best
Component Better than coaxial
Coaxial Good
To connect a cable or satellite box:
1 Connect the incoming cable from the cable TV
or satellite TV wall jack to the cable-in jack on
the cable box.
Component
2 Depending on the jacks available on the cable
or satellite TV box, connect a cable from the
outgoing jacks on the cable or satellite TV box
to the corresponding jacks on the back or side
of your TV. The connection can be to an HDMI
jack or the COMPONENT Y/P
3 If you use the COMPONENT Y/P
connect an audio cable (provided) to the
COMPONENT L/R audio jacks.
Note
If the cable or satellite TV box does not have an HDMI
or component video connection, connect the cable
or satellite TV box to the ANT/CABLE IN jack on the
back of your TV. For more information, see
"Connecting an antenna or cable TV (no box)" on
page 10.
Side of TV
HDMI
/P jacks.
B R
/P jacks,
B R