Insignia NS-46E570A11 Quick Setup Manual

42"/46" LED-LCD TV

QUICK SETUP

GUIDE
NS-42E570A11/NS-46E570A11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Component
Audio Remote control
cable cable and 2 AAA
batteries
Cleaning Remote
cloth control holder
TV stand and screws
Quick Setup Guide
Front features
Power
indicator
Remote
control sensor
Installing the stand
1 Carefully place your TV screen
face-down on a cushioned, clean
surface to protect the screen from
damages and scratches.
2 Secure the base to the stand
with the four screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the
screen from damages and
scratches.
2 Remove the four screws that
secure the base to the stand, then
remove the base.
3 Attach the wall-mount brackets to the
back of your TV using screws provided with
the wall mount.
Setting up your remote control
1 Remove the battery cover.
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
3 Replace the cover.
Programming your remote control
To program an existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony TIVO Comcast Dish Network Motorola
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 Series 3, HD M1057 VIP508, VIP622 DRC800
PMDVR8, PDVR8
135 0464 8043 0091 0463 720 0463
115
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game console
Using HDMI (best)
Using component (good)
DirectTV
RC23
10463
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the
back of your TV and the RF OUT jack on the antenna.
Connecting a Home Theater System
Using analog audio
Using digital audio