Side; Remote Control - Insignia NS-46E570A11 User Manual

Insignia 42"/46" LED-LCD TV, 120Hz 1080p

Side

# Item Description
Connect an external sound system to these jacks. For
1 more information, see "Connecting an analog sound
AUDIO OUT
system" on page 13.
Connect headphones to this jack. For more
2
information, see "Connecting headphones" on
(headphone)
page 12.
Connect a USB device, such as USB flash drive, to this
3
USB
jack.
Connect an HDMI devices to these jacks. An HDMI
cable carries both video and sound. You do not need to
make an audio connection for an HDMI device.
HDMI1/HDMI2/
4
For more information, see "Connecting an HDMI
HDMI3/HDMI4
device" on page 11.
When connecting a DVI device using an HDMI-DVI
adapter, connect the device to the HDMI1 jack.
Connect an audio amplifier to this jack. For more
5 information, see "Connecting a digital sound system"
SPDIF
on page 12.

Remote control

# Item
1
(power)
2 INPUT
3
AUDIO
4
DYN VOL
5 Numbers
6
—
7 MUTE
8 VOL+/VOL–
9
FAV
www.insigniaproducts.com
Description
Press to turn your TV on or off (Standby mode). When
your TV is off, power still flows into it. To disconnect
power, unplug the power cord.
Press to open the Source List, then press
cycle through the available input sources. For more
information, see "Selecting the video input source" on
page 14.
Press to select SRS, Bass, Treble, Balance, or Reset
Audio Settings. For more information, see
"Adjusting sound settings" on page 19.
Press to select the level of Audyssey Dynamic Volume.
You can select Heavy, Medium, Light, or Off. For
information see "Adjusting sound settings" on
page 19.
Press to enter channel numbers and the parental
control password.
Press to enter a digital sub-channel number. For more
information, see "Selecting a channel" on page 15.
Press to mute the sound. Press again to restore the
sound.
Press to increase or decrease the volume.
Press to open the Favorite Channel list. For more
information, see "Setting up a favorite channel list" on
page 21.
or to
7