Table of Contents
Advertisement
9
To change other one-touch dial information, press the one-touch dial key,
and then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
Speed Dialing
Programming a Speed Dial Number
Register frequently used fax numbers with speed dial numbers (maximum
100). Enter the speed dial number when sending a fax to recall the fax num-
ber.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press , key.
3
Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4
Using the keypad, enter the 3-digit speed dial number (ex. 011) that you
want to program.
If the speed dial number that is entered is already registered with a
recipient, the message "REGISTERED!" appears. Press the Menu
Select key, and then press a speed dial number with no recipient reg-
istered.
5
Enter the name of the speed dial to be programmed, and then press the
Menu Select key.
Text up to 20 characters long can be entered for the name.
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 73.
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)
Speed Dialing
53
Advertisement
Table of Contents
