Table of Contents
Advertisement
3 Overview
3.1 Back view
This picture shows the backside of the LED PAR.
DMX-Input:
In case of external DMX control, the DMX cable is connected here.
DMX-Input pin
1
2
3
DMX-Output:
Connect here the DMX cable for next unit.
DMX-Output pin
1
2
3
Function:
This 4 pin dipswitch sets, the function mode of the LED PAR.
Pattern:
The function of this 10 pin dipswitch depend on the selected mode, e.g. in chaser mode the
chaser patterns are selected here.
Speed:
Manual speed setting.
Music:
Sensitivity control for the build in microphone.
Signal
Ground
Signal "-"
Signal "+"
Signal
Ground
Signal "-"
Signal "+"
9
Advertisement
Table of Contents
