Example B - Pulse STAGEPAR-108 User Manual

9.5.2 Example B

This example shows how to set up eight LED PARs to be controlled in 5ch DMX master
mode. The patterns are still send out for 4channels.
Connection:
MASTER SLAVE1 SLVAE2 SLAVE3 SLAVE 4 SLAVE 5 SLAVE6 SLAVE8
UNIT1 UNIT2
Master setup:
The master unit, UNIT1, need to be set by this table:
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Colour pattern selection
0 0 0 0
SW4 SW3 SW2 SW1 Mode
0 1 0 0
The items consumes ch1, ch2, ch3, ch4, ch5.
SLAVE1:
SLAVE1, UNIT2, DMX start channel 6:
SW10 SW9 SW8 SW7
0 0 0
The item start to receive with the DMX channel 6.
The items consumes ch6, ch7, ch8, ch9, ch10.
SLAVE2:
SLAVE2, UNIT3, DMX start channel 11:
SW10 SW9 SW8 SW7
0 0 0
The item start to receive with the DMX channel 11.
The items consumes ch11, ch12, ch13, ch14, ch15.
SLAVE3:
SLAVE3, UNIT4, DMX start channel 16:
SW10 SW9 SW8 SW7
0 0 0
The item start to receive with the DMX channel 16.
The items consumes ch16, ch17, ch18, ch19, ch20.
UNIT3 UNIT4
0 1 0 0
DMX master 5ch, speed control by potentiometer
10 Pin Dipswitch
SW6 SW5 SW4
0 0 0 0
10 Pin Dipswitch
SW6 SW5 SW4
0 0 0 1
10 Pin Dipswitch
SW6 SW5 SW4
0 0 1 0
UNIT5 UNIT6
1 0 chaser pattern 1, right to left, same colour each step
SW3 SW2 SW1
1 1 0
SW3 SW2 SW1
0 1 1
SW3 SW2 SW1
0 0 0
29
UNIT7 UNIT8
4 Pin Dipswitch
SW4 SW3 SW2
0 0 1
4 Pin Dipswitch
SW4 SW3 SW2
0 0 1
4 Pin Dipswitch
SW4 SW3 SW2
0 0 1
SW1
1
SW1
1
SW1
1