Supported Function Modes; Modes Which Support Dmx Input Or Dmx Output - Pulse STAGEPAR-108 User Manual

Table of Contents

Advertisement

2.1 Supported function modes

2.1.1 Modes which support DMX input or DMX output

2.1.1.1 5 channel master mode
In this mode the LED PAR is used as a 4 channel DMX master.
The 5channel master mode is offered to be compatible to the first revision of the LED PAR.
The 5channel master mode uses build in functions of the LED PARs. Which will be
controlled by the DMX signal.
There are different patterns available e.g. all connected LED PARs do the same, each shows
different patterns, chaser programs, fade in – fade out patterns and fade over patterns. The
steps of the patterns can be controlled by music beat or by a potentiometer. The music
sensitivity is controllable. The colour patterns offers a 100% colour mode, a 100% / 50%
colour mode, and a 100% / 75% / 50% /25% colour mode. The colours are shown by random.
2.1.1.2 3 channel master mode
In this mode the LED PAR is used as a 4 channel DMX master.
The 3channel master mode is offered for less consumption of DMX channels e.g. in case of
connected DMX power packs or other DMX receivers.
There are different patterns available e.g. all connected LED PARs do the same, each shows
different patterns, chaser programs, fade in – fade out patterns and fade over patterns. The
steps of the patterns can be controlled by music beat or by a potentiometer. The music
sensitivity is controllable. The colour patterns offers a 100% colour mode, a 100% / 50%
colour mode, and a 100% / 75% / 50% /25% colour mode. The colours are shown by random.
2.1.1.3 5 channel slave mode
In this mode the LED PAR is used as a DMX slave.
The 5channel slave mode is supported if the LED PAR is in use with the first revision of the
LED PAR. The 5channel slave mode uses build in functions, which be controlled by the
DMX signal. An external DMX controller controls the Led PAR.
2.1.1.4 3 channel slave mode
The 3channel slave mode is for use with a standard DMX controller. The LED PAR can be
controller with all 512 channels. Each colour is controlled by one DMX channel. All 512
DMX channels can be used.
7

Advertisement

Table of Contents
loading

Related Products for Pulse STAGEPAR-108

Table of Contents