Introduction - Pulse STAGEPAR-108 User Manual

2 Introduction

Main feature of this LED PAR is, that it can be used as a 4ch DMX controller.
In this mode 4 LED PARs are connected with XLR cables on their DMX In-/Outputs.
The first LED PAR is set to DMX master mode. Now the LED PAR in master mode sent
control signals to the connected slaves. There are different patterns available e.g. all
connected LED PARs do the same, each shows different patterns, chaser programs, fade in –
fade out patterns and fade over patterns. The steps of the patterns can be controlled by music
beat or by a potentiometer. The music sensitivity is controllable. The colour patterns offers a
100% colour mode, a 100% / 50% colour mode, and a 100% / 75% / 50% /25% colour mode.
The colours are shown by random.
A 3ch DMX slave mode is supported, for easy connection in a DMX system. All 512channels
are supported.
Stand alone modes colour change, fading patterns and fixed colour settings are supported.
6