Installation; Overview; Required Tools And Materials - Bay Networks BayStack350T User Manual

10/100 autosense switch

Table of Contents

This chapter explains how to install the BayStack Model 350T 10/100 Autosense

Switch. The switch can be placed freestanding onto a tabletop or shelf, mounted

on a wall, or installed into a 19-inch equipment rack.

Installing the BayStack 350T switch consists of unpacking the equipment,

physically installing the switch, connecting the network cables, and then

connecting the power.

The following tools are required to install the BayStack 350T switch:

•

Caution: The screws and wall composition must be able to withstand the

weight of the device, plus the additional weight of the attached network cables

and power cords.

893-00992-A

For installation in a standard 19-inch equipment rack—use a Phillips (or

cross-head) screwdriver.

For wall mounting—four screws (not supplied) are required to mount the

BayStack 350T switch onto a wall. The screw size and type depends on the

wall composition where you intend to mount the switch. Have an experienced

maintenance person choose the appropriate hardware according to your wall

composition.

Chapter 2

Installation

2-1

Table of Contents