Installing The Baystack Switches; Installation Requirements - Bay Networks BayStack 303 User Manual

This chapter provides the following information for the BayStack switches:
•
•
•
•
Refer to
further configure your BayStack switches.

Installation Requirements

Before installing a The BayStack 303 or 304 switch, verify that the package
contains the following items in addition to this guide:
•
•
•
•
You will need a Phillips screwdriver for the installation.
Install the BayStack switches on a sturdy, level surface in a ventilated area that is
dust free and away from heat vents, warm air exhaust from other equipment, and
direct sunlight. Avoid proximity to large electric motors or other electromagnetic
equipment. When choosing a location, observe the guidelines listed in
Appendix A, "Technical
893-01010-A

Installing the BayStack Switches

Installation requirements
Installation procedure
Instructions for attaching devices
Instructions for the initial switch setup
Chapter 3, "Customizing and Managing the BayStack
A BayStack 303 Ethernet Switch or BayStack 304 Ethernet Switch
Power cable (applicable for operating country; see
Specifications" on page
Rack-mounting kit (applicable for metal chassis or plastic chassis)
Warranty card
1-8).
Specifications."
Chapter 2
Switches," to
"Power Cord
2-1