Appendix C Switch Default Settings - Bay Networks BayStack350T User Manual

This appendix lists the factory default settings for the BayStack 350T switch
(see
Table C-1. Factory default settings for the BayStack 350T switch
Field
BootP Request Mode:
In-Band IP Address:
In-Band Subnet Mask:
Default Gateway:
Read-Only Community String:
Read-Write Community String:
Trap IP Address:
Community String:
Authentication Trap:
sysContact:
sysName:
sysLocation:
Aging Time:
Find an Address:
V1 through V8
Status
Auto Negotiation
Port:
893-00992-A
Table C-1).
Default Setting
BootP When Needed
0.0.0.0 (no IP address assigned)
0.0.0.0 (no subnet mask assigned)
0.0.0.0 (no IP address assigned)
public
private
0.0.0.0 (no IP address assigned)
Zero-length string
Enabled
Zero-length string
Zero-length string
Zero-length string
300 seconds
00-00-00-00-00-00
(no MAC address assigned)
All ports configured in VLAN V1
Enabled for all ports
Enabled for all ports
1
Switch Default Settings
Used in CI Screen:
IP Configuration
SNMP Configuration
System Characteristics
MAC Address Table
VLAN Configuration
Port Configuration
Port Statistics
Appendix C
C-1