Quick Start - Bay Networks BayStack350T User Manual

Quick Start

This section provides Quick Start procedures for installing and setting up the
BayStack 350T switch. It is intended for experienced installers or system
administrators that are familiar with the BayStack 350T switch installation and
setup procedures provided in this manual.
If you are experienced in installing network devices, or if you are installing
multiple BayStack 350T switches, you can probably use the installation flowchart
provided in this section to guide you through the installation. If you need more
information about any of the steps listed in the flowchart, refer to
"Installation" for a complete explanation of the installation process.
After you have verified the installation, you can use other Quick Start procedures
in this section to set up and begin the management of the switch. Refer to
Chapter 3, "Using the Console
the switch and using the console interface (CI) screens.
893-00992-A
Interface" for detailed information about setting up
Getting Started
Chapter 2,
1-11