Table of Contents
Advertisement
Using the BayStack Model 350T 10/100 Autosense Switch
Software Download
The Software Download screen (see
BayStack 350T switch software image that is located in nonvolatile flash memory.
Note that to download the BayStack 350T software image, a properly configured
Trivial File Transfer Protocol (TFTP) server must be present in your network, and
your switch must be configured with an IP address (see "IP Configuration" on
page 3-8
You can monitor the progress of the software download process by observing the
BayStack 350T LED indicators (see
Process" on
Caution: Do not interrupt power to the device during the software download
process. If the power is interrupted, the firmware image can become corrupted.
Image Filename:
TFTP Server IP Address:
Start TFTP Load of New Image:
The Software Download process has started.
switch before the process has completed (approximately 10 minutes).
Press Ctrl-R to return to previous menu.
Figure 3-21.
3-44
to configure the switch IP address).
page
3-45).
Software Download
Software Download screen
Figure
3-21) allows you to revise your
"LED Indications During the Download
[ b350_100.img ]
[ 192.0.1.12 ]
[ Yes ]
Do NOT power down the
Press Ctrl-C to return to Main Menu.
893-00992-A
Advertisement
Table of Contents
