Table of Contents
Advertisement
9.2.2
Adjusting the angle
WARNING: Danger of Injury if footrest or legrest is incorrectly adjusted!
• Before and during each drive, always make sure there is sufficient clearance between the
legrest (or footrest) and the ground, as well as the castors!
Requirements:
• 1x Allen key 6 mm
NOTE
When adjusting the footrest, keep an eye on the small metal pin (3), which determines the lowest
position of the footrest. It can fall out and get lost during adjustment.
• Loosen the screw that allows the angle to be adjusted (1).
• Adjust to the desired angle.
• Tighten the screw again.
NOTE
If the footrest still cannot be moved after loosening the screw, position a metal pin in the hole on
the side (2) and tap it lightly with a hammer. This releases the clamping mechanism inside the
footrest. If necessary, repeat this procedure from the other side of the footrest.
55
Advertisement
Table of Contents
