Table of Contents
Advertisement
Height
Width
Length
Tyres
Tyre pressure if fitted with
pneumatic tyres
* The actual kerb weight depends on the fittings your mobility aid has been supplied with. Every Invacare® mobility aid is weighed when
leaving the works. Please refer to the nameplate for the kerb weight (including batteries) measured.
** Note: The drive range of an electric wheelchair is strongly influenced by external factors, such as the charging state of the batteries,
surrounding temperature, local topography, road surface characteristics, tyre pressure, weight of user, drive style and use of batteries for
lighting, servos etc.
The specified values are theoretical maximum achievable values measured according to ISO 7176-4:2008.
***
Static stability according to ISO 7176-1 = 9° (15,8 %)
Dynamic stability according to ISO 7176-2 = 6° (10,5 %)
106
•
approx. 950 mm
•
approx. 620 mm
•
approx. 1020 mm
The recommended maximum tyre pressure in bar or kpa is marked
on the side wall of the tyre or the rim. If more than one value is
listed, the lower one in the corresponding units applies.
(Tolerance = -0.3 bar,1 bar = 100 kpa)
Advertisement
Table of Contents
