WARNING: Danger of injury if support rods are not correctly secured! The seat tilt can be
released unintentionally by abrupt braking and maneuvering!
• When tightening the thumb screws, make sure they securely fit into the notches in the support
rods!
WARNING: Danger of injury!
• The user must not be in the wheelchair whilst the seat tilt is being adjusted!
Adjusting the seat tilt
• Loosen both thumb screws.
• Adjust the seat tilt to the desired angle by lifting or lowering the seat frame.
• Re-tighten both thumb screws again in the desired notches.
44