Table of Contents
Advertisement
I
Copying Pictures to a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
Do
NOT
connect the camera
to
the computer until installation is complete.
Installing FinePixViewer
FinePixViewer is available in Windows and Macintosh versions. Installation instructions for Windows
are on pages 27-28, those for the Macintosh on pages 29-30.
Installing FinePixViewer: Windows
1
Confirm that the computer meets the following system requirements:
os
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional
(Service Pack 2), or Windows 2000 Professional (Service Pack 4)
· Windows Vista:
800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
CPU
• WindowsXP:
800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
· Windows 2000:
200 MHz Pentium or better
· Windows Vista:
512 MB or more (1 GB or more recommended)
RAM
•
WindowsXP:
512 MB or more
• Windows
2000: 128 MB or more
Freedisk
A minimum of 450MB required for installation with 600MB available when FinePixViewer is running (15GB or
space
more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video
800
x
600 pixels or more with 16-bit color or better (1,024
x
768 pixels or more with 32-bit color recommended)
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other
•
Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet con-
nection and e-mail software required to use e-mail option.
[l]
Caution
For information about Windows 7, visit http://www.fujifilm.com/support/downloQd/camera/software/ Other
versions of Windows are not supported. Operation is not guaranteed on home- built computers or comput-
ers that have been upgraded from earlier versions of Windows.
Advertisement
Chapters
Table of Contents
