Connecting The Camera - FujiFilm Finepix S200 EXR Basic Manual

.. Note
The camera will not turn off automatically while connected to a computer.
Connecting the Camera
1
If the pictures you wish to copy are stored on a
memory card, insert the card into the camera
(pg. 11). If no card is inserted, pictures will be
copied from internal memory.
[l] Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
2
Turn the camera off and connect the supplied
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard .
3
Turn the camera on and press [E button.
FinePixViewer will start automatically and the
"Save Image Wizard" will be displayed. Follow
the on-screen instructions to copy pictures to
the computer. To exit without copying pic-
tures, click Cancel.
[l] Caution
If FinePixViewer does not start automatically, the
software may not be correctly installed. Discon-
nect the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help men u.
31