Maintenance Menu - Oki C5700 User Manual

I
TEM
SUBNET MASK
GATEWAY
ADDRESS
FACTORY
DEFAULTS
WEB
TELNET
FTP
SNMP
NETWORK
SCALE
HUB LINK
SETTING
M
AINTENANCE MENU
This menu provides access to various printer maintenance
functions.
I
TEM
MENU RESET
SAVE MENU
POWER SAVE
Downloaded From ManualsPrinter.com Manuals
S E
ETTINGS XPLANATION
xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
xxx.xxx.xxx.xxx Current assigned gateway address.
To change, proceed as above.
EXECUTE Reloads the settings present when
the unit was setup by the
manufacturer.
ENABLE / Enables or disables Web config.
DISABLE facility.
ENABLE / Enables or disables Telnet config.
DISABLE facility.
ENABLE / Enables or disables communication
DISABLE via FTP.
ENABLE / Enables or disables SNMP protocol.
DISABLE
NORMAL / Selects network size.
SMALL
AUTO Sets full or half duplex for
NEGOTIATE communication via a network hub.
100BASE-TX
FULL
100BASE-TX
HALF
10BASE-T FULL
10BASE-T HALF
S E
ETTINGS XPLANATION
EXECUTE Resets menus to default settings.
EXECUTE Saves current menu settings as
default values. At confirmation
prompt, press ENTER to confirm
save, or CANCEL to cancel.
ENABLE / Enables or disables automatic power
DISABLE save mode. Delay before entering
this mode is set in the system
configuration menu.
Menu functions> 136