Graphic Pro Workflow - Overview - Oki C5700 User Manual

G
RAPHIC PRO WORKFLOW
There are three steps to using the Graphic Pro colour matching
system:
1.
2.
3.
S
TEP
Where can I get the profiles I need?
P
ROFILE TYPE
RGB Source
(RGB Input)
CMYK
Simulation
(CMYK input)
Printer
(CMYK Output)
Link Profile
S
TEP
You can download profiles to the printer hard disk using the
Profile Assistant utility.
Using Profile Assistant
1.
2.
Downloaded From ManualsPrinter.com Manuals
Gather or create ICC profiles (see below)
Download ICC profiles to the printer hard disk (page 59)
Select the ICC profiles in the printer driver when printing
(page 61)
1 - G
ATHER OR CREATE THE
W
HERE TO GET PROFILES
Obtain your RGB source profiles from your scanner,
camera or monitor manufacturer.
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
The factory default profiles for your printer are built-in. If
you need greater accuracy, you should create your own
printer profile using third-party ICC profile creation
software.
You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.
2 - D
OWN LOADING
Launch Profile Assistant
Select a printer
If this is the first time you have used Profile Assistant, you
should allow the utility to search for compatible printers.
Select the connection types that you wish to search – USB
or Network (TCP/IP), and click [Start].
–
OVERVIEW
ICC
PROFILES
ICC
PROFILES TO THE PRINTER HARD DISK
Colour matching> 59