8.
9.
10.
Downloaded From ManualsPrinter.com Manuals
From the [Feature Sets] menu (7), select [Colour –
Graphic Pro 2].
7
8
9
From the [RGB Profile source] (8), select the ICC profile
that corresponds to the device you are trying to match
such as your monitor, scanner or digital camera.
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See "Using Profile Assistant"
on page 59.
From the [Simulation Target Profile] menu (9), select the
profile of the device you wish to simulate.
Remember that the names "CMYK Source 1", "CMYK
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See "Using Profile Assistant"
on page 59.
Colour matching> 74