Advertisement
Chapter 2 — Installing Hardware
Replacing the Fan Assembly
In case of fan failure, you can quickly replace the fan assembly.
Follow these instructions to replace the fan assembly:
1.
Remove the chassis cover. See Removing the Chassis Cover on page 5.
2.
Disconnect the three (3) power cables from the backplane.
Remove the single securing screw from the chassis as shown.
3.
Slide the assembly to clear the securing pins, and pull up as shown .
4.
5.
Select the fan module to replace and remove the screws from the assembly carrier.
6.
Replace the fan and reverse steps 5 to 1 to connect the fan assembly.
20
Hide quick links:
Advertisement
Troubleshooting
