QUANTA QSSC-S99K 2U User Manual page 135

Chapter 5 — ESMS
Note: To change any of the settings on the Network Configuration page, you must have permission to configure BMC. Don't
do network configure when the server is in BIOS mode; the network configuration may be conflict with BIOS.
Items
MAC Address
Obtain an IP address
automatically
Use the following IP
address
IP Address
Subnet Mask
Default Gateway
Items
Obtain DNS IP address
automatically
Use the following DNS IP
address
Primary DNS Server
Secondary DNS Server
Note: If you configure the IP address with a static IP, you can't get the DNS IP address from DHCP server.
Items
Enable DNS Register
BMC Host Name
DNS BMC Host Name
Load Default Host
Enable DNS Domain
Name(use DHCP)
DNS Domain Name
Note: If you want to update the DNS information with the DNS server, you must select "Obtain an IP address automatically"
to get the IP address dynamically. The DNS server IP will be provided by the DHCP server.
Displays the MAC address.
This option allows the IP to be configured by a DHCP server (dynamically).
This option allows you to configure the IP address with a static IP. The IP Address, Subnet Mask,
Default Gateway will become editable when this option is selected.
Setup the IP address.
Setup the Subnet Mask
Setup the gateway access address of the BMC.
This option allows the DNS IP to be configured by a DHCP server (dynamically).
This option allows you to configure the DNS IP address with a static IP. The Primary and
Secondary DNS Server will become editable when this option is selected.
Specify the IP address of the preferred DNS server.
Specify the alternative IP address to be used when the preferred DNS server is not available.
When checked, it will register with the Domain Name Server. DNS BMC Host Name field will
become read-only when this option is selected.
Specifies the DNS BMC host name.
Press this button to load default DNS BMC Host Name, the format is "bmc-[MAC Address]".
Enable / disable acquisition of DNS Domain Name from DHCP server. DNS Domain Name field
will become read-only when this option is selected.
Specified the DNS domain name.
Description
Description
Description
127