QUANTA QSSC-S99K 2U User Manual page 130

Item
Name
Status
Reading
Threshold
Refresh
Hide Thresholds
Event Log
The System Event Log page displays system events that occur on the managed system. The system event log is generated by
the BMC, BIOS or OS.
The log lists the following information about Event ID, Time Stamp, Sensor Name, Sensor Type and a short Description. The
list may be sorted by clicking any column heading in the event log list. Subsequent clicks on the column headings reverse the
sort.
Note: If the event log belongs to OEM SEL Record, the Sensor Type field will display the Manufacturer ID and the
Description field will display the raw data of OEM Defined field. Because these logs are recorded by OS, and need to be
decode by OS, please use Windows Event Viewer to get further data.
Name of the sensor.
Show the current status of the sensor.
The current value of the sensor.
Displays the threshold settings:
 Low NR: lower non-recoverable
 Low CT: lower critical
 Low NC: lower non-critical
High NC: upper non-critical

 High CT: upper critical
 High NR: upper non-recoverable
Click to refresh this table.
Click to hide the threshold value of the sensor.
Event Log web page
Description
122
Chapter 5 — ESMS