Connecting Wires To Terminals - JVC KW-V41BT Instruction Manual

CONNECTION/INSTALLATION
Connection

Connecting wires to terminals

See page 53.* 1
10 A fuse
Connect SiriusXM
Connect Vehicle
Tuner (commercially
available).* 2 (Page 52)
1
White ª / White with black stripe · : To front speaker (left)
Gray ª / Gray with black stripe · : To front speaker (right)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Power antenna wire)
Blue with white stripe (Remote output wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
USB terminal (0.8 m): See page 52.*
See page 52.
Connect the antenna cord to the
antenna terminal.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
* 4
To automatic antenna if any (250 mA max.)
(POWER ANTENNA)
To the remote lead of other equipment (200 mA max.)
(REMOTE OUTPUT)
To the OE remote adapter matching your car
(STEERING WHEEL REMOTE)
To car light control switch
(ILLUMI)
* 1 Only for KW-V41BT/KW-V21BT.
3
* 2 Only for KW-V41BT Region 1/KW-V21BT Region 1.
* 3 Only for KW-V41BT.
* 4 If no connections are made, do not let the cable come
out from the tab.
Connect to the vehicle's reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle's
3
parking brake detection
switch harness.
• For best safety, be sure to
connect the parking sensor.
To car chassis
Ignition key switch
Fuse box
Battery
ENGLISH
51