Connecting Wires To Terminals - JVC KW-V41BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection

Connecting wires to terminals

10 A fuse
See page 46.
1
White ª / White with black stripe · : To front speaker (left)
Gray ª / Gray with black stripe · : To front speaker (right)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Power antenna wire)
Blue with white stripe (Remote output wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
See page 46.* 2
(POWER ANTENNA)
(REMOTE OUTPUT)
(STEERING WHEEL REMOTE)
USB terminal (0.8 m): See page 46.* 1
Connect the antenna cord to the
antenna terminal.
See page 46.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
*
3
To automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
To the OE remote adapter matching your car
To car light control switch
(ILLUMI)
(ACC)
(BATT)
(GND)
* Only for KW-V41BT.
1
*
2 Only for KW-V41BT/KW-V21BT.
* If no connections are made, do not let the cable come out
3
from the tab.
Connect to the vehicle's reverse lamp harness when using
the optional rear view camera.
Connect to the vehicle's parking
3
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Ignition key switch
To car chassis
Fuse box
Battery
ENGLISH 45