Tuner - JVC KW-V41BT Instruction Manual

TUNER

Listening to the radio
Preparation: Select the appropriate tuner
channel interval for <Area Setting>. (Page 22)
Indications and buttons on the source
control screen
1 2 3 4 5 6 7 8
Tuner reception information
1 Text information
• Pressing [H] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
2 Band
3 STEREO/MONO indicator
• The STEREO indicator lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
4 TI indicator
5 Seek mode
6 LO indicator
7 Preset no.
8 The station frequency currently tuned in
Operation buttons
• Selects a stored station. (Press)
[P1] – [P6]
• Stores the current station. (Hold)
Changes the settings for tuner
[Mode]
reception on the <Tuner Mode>
screen. (Page 22)
Presets stations automatically.
[SSM ]*
(Page 22)
Activates/deactivates TI standby
[TI]*
reception mode. (Page 23)
Activates/deactivates monaural
[MONO]*
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
Changes the display information.
[Text]
(See the right column.)
Enters PTY search mode. (Page 23)
[PTY]*
Selects the AM band.
[AM]
Selects the FM band.
[FM]
Changes the seek mode.
[Seek]
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual Search
Searches for a station.
[S] [T]
• The search method differs
according to the selected seek
mode. (See above.)
* Appears only when FM is selected as the source.
Changing the display information
The preset list containing the station names for FM
RBDS (when a PS signal is coming in) is displayed.
• Press [Text] again to display the text information
for the station currently being received.
ENGLISH
21