JVC KW-V41BT Instruction Manual page 32

BLUETOOTH
Connecting a registered Bluetooth
device
Display the <Bluetooth Setup> screen.
1
(Page 31)
2
Select the device you want to connect
3
(1), then select what you want to use the
device for (2).
[TEL (HFP)]: for mobile phone
[Audio (A2DP)]: for Bluetooth audio player
[PANDORA (SPP)]: for Pandora*
• Selectable items depend on the device you
are operating.
• If you connect a device while another device
is connected, the device previously connected
is disconnected and the connection for the
newly connected device is established.
32
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are
displayed when the information is acquired
from the device.
To disconnect
Select [TEL (HFP)], [Audio (A2DP)], or [PANDORA
(SPP)]* to disconnect the Bluetooth device being
used for that function on the <Paired Device List>
screen (see the left column).
* [PANDORA (SPP)] appears only for KW-V41BT Region 1/
KW-V21BT Region 1.
Deleting a registered Bluetooth device
Display the <Bluetooth Setup> screen.
1
(Page 31)
2
*
Select a device to delete (1), then delete
3
the registration (2).
A confirmation message appears. Press [Yes].
* [PANDORA (SPP)] appears only for KW-V41BT Region 1/
KW-V21BT Region 1.
Using the Bluetooth mobile phone
Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 29 )
To reject a call
When <Auto Response> is set to [ON] (Page 37)
The unit answers the incoming call automatically.
Ending a call
While talking...
*