Network Page Definitions; Table 10: Network Page Definitions - Grandstream Networks GXP2130 Administration Manual

NETWORK PAGE DEFINITIONS

Network -> Basic Settings
Internet Protocol
IPv4 Address Type
DHCP Host name
(Option 12)
DHCP Vendor Class ID
(Option 60)
PPPoE Account ID
PPPoE Password
PPPoE Service Name
FIRMWARE VERSION 1.0.1.19 GXP2130/GXP2140/GXP2160 ADMINISTRATION GUIDE
Select Account and enter the Voice Mail access number in the Value
field.

Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the
last answered call.

Transfer
Select Account, and enter the number in the Value field to be
transferred (blind transfer) during the call.

Call Park
Select Account, and enter the call park extension in the Value field to
park/pick up the call.

Intercom
Select Account, and enter the extension number in the Value field to
do the intercom.

LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP
search base in the Name field. It could be the same or different from
the Base in LDAP configuration under Advanced Settings. The Base
in LDAP configuration will be used if the Name field is left blank.
Enter the LDAP Name/Number filter in the Value field.

Table 10: Network Page Definitions

Selects Prefer IPv4 or Prefer IPv6.
Allows users to configure the appropriate network settings on the phone to
obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Page 40 of 57