Cleaning The Transfer Roller Unit And Paper Transfer Path - Oki C911dn User Manual

Device Maintenance
Cleaning the Transfer Roller
Unit and Paper Transfer Path
1
If the front or rear edge of the output paper
becomes dirty frequently, clean the transfer
roller unit and paper transfer path.
Periodical cleaning prevents dirt and stains.
Note
z Be careful not to touch sponge of the transfer roller unit
2
or damage the transfer roller unit.
z Do not use water or such solvents as neutral detergent
and methyl alcohol. It may damage the transfer roller.
Please prepare a soft tissue paper
1
Press and hold the power switch for
about 1 second to turn off the power.
2
Check that the control panel has been
turned off completely, and then turn off
the main power.
3
Lift the opener ( ) of the exit unit, and
pull out the exit unit.
4
Raise the lock lever (blue) of the fuser
unit.
CAUTION
Do not touch the fuser unit because it is hot.
- 96 -
There is a risk of injury.