Display - Marantz VP-10S1 User Manual

Display

You can make the following settings.
Menu
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
– Keystone V / H
Corrects the trapezoidal shape of the projected image. (For details, "Keystone Correction"
– Auto Adjust
Use this mode for RGB input when RGB System on the System menu is set to "Auto".
Yes : The Picture Shift V/H, vertical/horizontal resolution and Phase of the RGB signal are set automatically.
No : Disables automatic image adjustment. Set Picture Shift V/H, Size V/H and Phase yourself.
Select "Yes" with the
– Picture Shift V / H
Shifts the position of the image. Picture Shift V shifts the image up/down, while Picture Shift H shifts the image left/right.
– Size V / H
Sets the vertical and horizontal size of the image.
– Phase
Sets the phase of the analog RGB signal from the computer and the clock phase of the A/D converter. Adjust the image to
where it looks the clearest.
❖
How to Operate the Display Menu
1.
Select the desired menu item and press the
The setting item will appear on the screen.
1 2
2.
Use the and
3
3. Press the button to enter the setting and return to menu item selection.
ENTER
Downloaded From projector-manual.com Marantz Manuals
Standard 1
Keystone V 0
Keystone H 0
Auto Adjust
Picture Shift V 0
0
Picture Shift H
0
Size V
Size H 0
Phase 16
1 2
and buttons and press the ENTER button.
2
buttons to set the item.
3.
PATTERN INPUT
1, 2
Menu item
Keystone V (Electronic vertical
keystone correction)
Keystone H (Electronic horizontal
keystone correction)
Auto Adjust
Picture Shift V
Picture Shift H
Size V
Size H
Phase
button.
MENU V-MUTE
ENTER
INPUT ASPECT
Adjustment range
-30
-30
Yes / No
-50
-50
-50
-50
0
pg. 19.)
3.
1, 2
30
30
50
50
50
50
31
31