Table of Contents
Advertisement
6. Using the KODAK DP1050 ULTRA
6.1 Different program modes for the
KODAK DP1050 ULTRA
KODAK DP1050 ULTRA has different modes
of operation:
Stand-by mode
Normal mode
Quick mode
Menu mode
Pointer mode
Blank mode
14
Stand-by mode
In stand-by mode the projector is turned off and can be
turned on by using defined keys, see section 6.3
Normal mode
In normal mode a picture will be shown on the screen.
The mouse will function as a normal PC/MAC mouse.
Quick mode
Quick mode is used with the interactive remote control
(quick key). You assign functionality for the quick key
on the remote control in the quick menu (see section
7.2.5). When clicking on the Quick key you will be able
to switch between all the functions you have selected in
this menu.
Menu mode
In menu mode the menu system is activated and you
use the mouse pad and the mouse buttons on the
remote control to navigate in the menu.
Pointer mode
In pointer mode you can move a pointer cursor on the
screen by using the mouse function.
Blank mode
In blank mode the screen is blanked out (black).
Contents
Advertisement
Table of Contents
