Table of Contents
Advertisement
7.2.4 Quick menu
Quick menu settings
25
In the quick menu you can assign functionality for the
quick key on the remote control. When clicking on the
quick key you will be able to switch between all the
functions you have selected in this menu. In this
example, the first time you click on the quick key you
will activate the volume function. A volume bar will be
displayed at the bottom of the projected image where
you can adjust the volume up and down. You adjust the
bar by either pressing the pressure-sensing pad right
or left or you may use one of the two zap keys on the
remote control. To accept the adjustment, and terminate
the quick menues click on the left mouse button.
To get back to the original volume, click on the right
mouse button.
The next click on the quick key will accept the volume
adjustment and activate the brightness function and a
brightness bar will be shown at the bottom of the page.
When you have gone through all assigned functions
the menu will disappear.
Contents
Advertisement
Table of Contents
