Caller Id Operation; Reviewing Caller Id Records; Call Back From The Caller Id Memory - Radio Shack 43-3816 Owner's Manual

CALLER ID OPERATION

If you subscribe to Caller ID service from your phone
company, the phone company sends information about the
call, as well as the time and date between the first and
second rings of every call you receive.
The system displays this information and stores up to 99
numbers only, or name and number, call records in its CID
memory, and then replaces the oldest call record with each
new one.
During an incoming call,
has more than 16 characters, only the first 16 characters
appear. The New Call LED flashes until all calls are
reviewed.
If the CID information received duplicates another call in
memory, the system updates the time/date.
number of times the call was repeated appear. If no button
is pressed within 30 seconds, the system returns to answer-
ready mode, and displays the total call counter, new call
counter, current time and date. Ô
R C
EVIEWING ALLER
Each time you receive a call, the system stores a CID
record that you can review later, even during a call.
±
1. Press to review recent calls.
REVIEW
²
2. Press to view old calls.
REVIEW
appears. If there is a voice message attached to the
call record, the system automatically plays the
message. Ô
C B
ALL ACK FROM THE
M
EMORY
±
1. Press or
REVIEW
to dial.
2. Press once, and then
CALL BACK
select the dialing mode.
3. Press .
CALL BACK
4. Pick up the handset or press
• Local phone number (7-digit number)
• 1 + local phone number (1+7-digit number if your
system requires you to dial 1 before a 7-digit number)
NEW
appears. If the caller's name
RPT
and the
ID R
ECORDS
-End of List-
C ID
ALLER
²
to select the number you want
±
REVIEW
SPKPHONE/HEADSET
Ô
Caller ID Operation
If there is no voice message
attached to a repeat number, the
latest call appears once during CID
review. For example, if you receive
a call from the same number 10
times, the CID displays the number
RPT 10
once and

Reviewing Caller ID Records

• The New Call LED flashes until
all the new CID records are
reviewed. If you do not press a
button within 15 seconds, the
system returns to answer-ready
mode.
• If the data in memory is
reviewed for the first time,
appears during your review.
Call Back from the Caller ID
Memory
If you do not pick up the handset
within 10 seconds, the current CID
memory reappears and you must
begin again at Step 1.
A CID record includes:
• call number
²
or to
• time and date of the call
• callers' telephone number
(if available)
• caller's name (if available)
. Ô
• voice message (if the calling party
leaves a message)
Ô
NOTE
appears.
NEW
21