Loading Wave Files (Load Wave Files); A Note About File Names - Roland VariOS User Manual

Loading wave files (Load Wave Files)

Here's how you can load wave files from the hard disk of your computer and send them to the VariOS.
When you execute this command, the Load Wave Files dialog box will appear.
1. Start up V-Producer.
* Before starting up V-Producer, you must power up the VariOS and connect the VariOS to your
computer via a USB cable. If you inadvertently start up V-Producer before powering up the VariOS
or connecting the USB cable, or if you power down the VariOS or disconnect the USB cable while V-
Producer is running, you must exit V-Producer, and then restart it.
2. At the bottom of the screen, click the [Sample Info] button (
List screen. In Sample List, click the [Load Wave Files] button (or choose File - Load Wave Files
menu).
fig.03-02LoadwavefileButton_50
* V-Producer is able to load wave files in Wave file format (.WAV), AIFF file format (.AIF), SD2 format,
or VariPhrase format (.VPW).

A note about file names

Do not use the following characters in a file name.
If you load a file with a name that includes any of the following characters, V-Producer
may fail to operate correctly.
Before loading such a file into V-Producer, you must delete these characters from the
file name.
56
\ / : , ; * ? " <
) to access the Sample
> |