Table of Contents
Advertisement
OMS settings
Here's how to make OMS settings. Before you make these settings, make
sure that the MIDI devices connected to your Macintosh and all peripherals
are powered up.
1
Use a USB cable to connect the VariOS to your computer, and turn on the
power of the VariOS.
fig.02-USB
Computer
Easy method using the sample settings
The "Driver" folder of the CD-ROM contains a sample OMS setup file
named "VariOS OMS Studio." As an easy way to make OMS settings, you
can copy this file into the "Opcode" folder of your hard disk, double-click to
open it, and continue the setup procedure from step 9 of p. 43.
2
Within the location (hard disk) to which you installed OMS, go to the
Opcode - OMS Applications folder, and double-click OMS Setup.
3
In the "Create a New Studio Setup" dialog box, click [OK].
This creates a new studio setup.
fig.02-oms-set-1.eps_30
4
In the OMS Driver Search dialog box,
click [Search] without checking the
check box.
If your MIDI interface is connected to a
serial port, check the port to which it is
connected.
fig.02-oms-set-2.eps_30
5
Make sure that the OMS Driver Setup
dialog box correctly indicates VariOS
USB IF.
Only the MIDI devices connected
directly to the Macintosh are displayed
here. Verify that your device(s) are
displayed correctly, and click [OK].
USB cable
USB connector
You must power up the
VariOS according to the
procedure given on p. 49.
VariOS
(Rear)
If AppleTalk is on, a dialog
box will appear, asking you
whether to turn it off or
leave it on. We recommend
that you use the Chooser in
the Apple menu to inactive
AppleTalk.
If the "Create a New
Studio Setup" dialog box
does not appear, select the
File menu and click "New
Studio Setup."
If an error dialog box is
displayed during the setup,
disconnect all MIDI cables
connected to the VariOS,
and make the OMS settings
once again.
MIDI devices that are not
powered up will not be
detected automatically by
OMS. If a MIDI device that
you thought was connected
is not detected, click
[Troubleshoot] and follow
the on-screen directions.
Installation
41
Advertisement
Table of Contents
