Listening to the demo songs
Playing the demo song
You will use V-Producer's Locator to play back the songs.
fig.02-locator
Current time
To beginning
1
Click the [Play] button in the Locator to play back the song.
When you play the song, the current time will change.
* If the demo song does not play, read "Q. No sound when you play back the demo song" in the
"Troubleshooting" section (p. 148).
• To stop the song
Click the [Stop] button.
• To move the current location a measure at a time
Click the [Fast-forward] or [Rewind] buttons.
• To change the tempo of the song
Master tempo:
Relative tempo:
* Relative tempo (speed) smoothly adjusts the tempo even while the song is playing. Use this when you
want to make a temporary change in tempo. This will not be saved in the song.
• To transpose the overall playback pitch in semitone steps
Drag the pitch value upward or downward.
To power down the VariOS, you must use the procedure described in "Turning the
VariOS on/off" (p. 49). "Turning the VariOS on/off" (p. 49) contains important
information about handling the VariOS, so please be sure to read it.
About the demo songs
For the song names and other details, refer to Readme.txt (found in the [Roland] - [V-Producer]
- [DemoSongs] folder).
48
Upper value: measure.beat.tick
Lower value: hours:minutes:seconds:frames
Rewind
Fast-forward Stop
Drag the tempo value upward or downward.
Drag the speed value upward or downward.
Tempo
Play
Pitch
Speed