Table of Contents
Advertisement
Installation
Windows 2000 users
Preparations for installing the driver
1
With the VariOS disconnected, start up Windows.
2
Log on to Windows as a user with administrative privileges (such as
Administrator).
3
Open the System Properties dialog box.
Click the Windows start menu, and from the menu, select Settings |
Control Panel.
In Control Panel, double-click the System icon.
fig.05-2e_30
4
Click the Hardware tab, and then click
[Driver Signature].
Open the Driver Signing Options
dialog box.
5
Make sure that "Driver Signing Options" is set to "Ignore."
If it is set to "Ignore", simply click [OK].
If it is not set to "Ignore", make a note of the current setting ("Warn" or
"Block"). Then change the setting to "Ignore" and click [OK].
6
Click [OK] to close the System Properties dialog box.
7
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
8
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
9
Click the Windows start menu, and from the menu, select "Run..."
Open the "Run..." dialog box.
26
Disconnect all USB cables
except for a USB keyboard
and USB mouse (if used).
After installing the driver,
restore the original setting.
Advertisement
Table of Contents
