MISCELLANEOUS OPERATIONS
Removal of the fuel pump
- Remove the rear storage compartment.
See: Procedure 1. page 17.
- Remove the central cover panel. (5 screw)
- Remove the 2 screws that secure the fuel
pump.
- Put a hose clamp P/N 755996 on the fuel
inlet hose (1).
- Disconnect the 2 fuel pipes.
- Disconnect the vacuum hose. (2)
- Remove the fuel pump.
Removal of the fuel gauge
- Remove the rear storage compartment.
See: Procedure 1. page 17.
- Remove the central cover panel. (5 screw).
- Remove the tank filler ring. (1)
- Disconnect the fuel gauge. (2)
- Remove the fuel gauge. (4 screw)
- Remove the rubber gasket.
N
When re-installing, use a new gasket.
Removal of the fuel tank
- Remove the footboard. See: Procedure 5
page 21.
- Remove the footboard supports.
(1)(4 screw)
38
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
755996
1
2
2
1
1