Removal Of The Engine Speed Adjuster Screw And Mixture Control Screw - PEUGEOT Vivacity Workshop Manual

MISCELLANEOUS OPERATIONS
- Remove the idle jet (14).
- Remove the main jet (15).
- Remove the jet spray nozzle (16).
- Check the condition of the needle valve and
the needle valve seat (A).
Removal of the engine speed adjuster screw
and mixture control screw.
- Turn clockwise the engine speed adjuster
screw (17) and mixture control screw (18)
while counting the number of turns until they
are screwed home.
- When re-fitting, this operation allows you to
put them back to their initial adjutment
position.
N
Do not turn the screws home forcefully.
- Remove the idle screw and the mixture
control screw with their spring.
42
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
15
14
16
A
18
17