Checking The Drive Belt; Checking The Clutch Linings - PEUGEOT Vivacity Workshop Manual

Checking the drive belt

Measure the width of the belt. (A)
Minimum width: 15.5 mm.
Make sure the belt is not cracked.

Checking the clutch linings.

- Using the depth calliper, measure the
thickness of the clutch linings.
Mini. thickness 1 mm.
- Make sure surface of the plates in contact
with the belt does not show any cracks or
signs of abnormal wear.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
A
A
B
31