Panasonic KX-TG9391C Operating Instructions Manual page 33

TG9391C(e).book Page 33 Wednesday, August 27, 2008 2:36 PM
– If the item has already been viewed or
answered, "Q" is displayed, even if it was
viewed or answered using another unit.
– If an arrow (>) is displayed after the number,
the whole phone number is not shown.
Proceed with the operation for your unit.
Base unit:
Press {8} to see the remaining numbers. To
return to the previous display, press {7}.
Handset:
Press {>} to see the remaining numbers. To
return to the previous display, press {<}.
L In step 3, the unit automatically uses the line you
set in line selection mode (page 16) to call back.
When the line selection mode is set to "Auto",
the indicated line (c or d) is used for the call.
If the indicated line is already being used or you
want to select the other line:
Base unit: Press {LINE 1} or {LINE 2}, then lift
the corded handset.
Handset: Press {CALL}, then press {LINE 1}
or {LINE 2}.
Editing a caller's phone number
before calling back
You can edit a phone number in the caller list by
adding the long distance code "1" or removing its
area code.
: Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {#}{2}{1}{3}
2
{V}/{^}: Select the desired entry.
3
Proceed with the operation for your unit.
Base unit: {EDIT}
Handset: {CALL}
4
Press {EDIT} repeatedly until the phone
number is shown in the desired format.
1 1 – Area code – Local phone number
Example:
1-555-321-5555
2
Local phone number
Example:
321-5555
Call Display Service
3 Area code – Local phone number
Example:
555-321-5555
5
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
L If the indicated line is already being used or
you want to select the other line:
Base unit: Press {LINE 1} or {LINE 2},
then lift the corded handset.
Handset: Press {LINE 1} or {LINE 2}.
Note:
L The number edited in step 4 will not be saved in
the caller list.
Erasing selected caller information
: Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {#}{2}{1}{3}
2
{V}/{^}: Select the desired entry.
3
{ERASE}
4
{V}/{^}: "Yes" i {SELECT}
5
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Erasing all caller information
: Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {#}{2}{1}{3}
2
{ERASE}
3
{V}/{^}: "Yes" i {SELECT}
4
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Storing caller information into the
phonebook
: Base unit
1
{CID}
33