Panasonic KX-TG9391C Operating Instructions Manual page 29

TG9391C(e).book Page 29 Wednesday, August 27, 2008 2:36 PM
*5 If you subscribe to a distinctive ring service, select a tone (base unit: tone 1 to 3/handset: tone 1 to 5).
If you select a melody, you cannot distinguish lines by their ringers.
*6 If you select one of the melody ringer tones, the ringer tone will continue to play for several seconds
even if the caller has already hung up. You may either hear a dial tone or no one on the line when you
answer the call.
*7 When the ringer volume is turned off, ~ is displayed followed by the selected line number(s) and the
base unit and/or handset do not ring for outside calls.
*8 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*9 Generally, the line mode setting should not be adjusted. If the LINE1 indicator or LINE2 indicator does
not light when another phone connected to the same line is in use, you need to change the line mode
to "A".
*10This feature allows the unit to automatically adjust the date and time setting when caller information
is received. To use this feature, set the date and time first.
Programming
29