Changing Automatic Linkage Mode - Fujitsu ScanSnap S1100 Operator's Manual

Changing Automatic Linkage Mode

Change automatic linkage mode options in the following procedure.
1.
Select [Help]
For details about the Right-Click Menu, refer to
The [ScanSnap Manager - Preferences] dialog box appears.
2.
Select the automatic linkage mode in the [Automatic Linkage] tab.
3.
Click the [OK] button to close the [ScanSnap Manager - Preferences]
dialog box.
Application will link with ScanSnap Manager using the linkage mode you selected.
Configuring ScanSnap Manager (for Windows users)
[Preferences] from the Right-Click Menu.
92
"Right-Click Menu" (page 59).