Changing Automatic Linkage Mode - Fujitsu ScanSnap iX500 Operator's Manual

Changing Automatic Linkage Mode

Change automatic linkage mode options in the following procedure.
1.
Select [Help] → [Preferences] from the Right-Click Menu.
For details about the Right-Click Menu, refer to
34).
The [ScanSnap Manager - Preferences] dialog box appears.
2.
Select the automatic linkage mode in the [Automatic Linkage] tab.
3.
Click the [OK] button to close the [ScanSnap Manager - Preferences]
dialog box.
The setting is changed to the selected automatic linkage mode.
HINT
To disable automatic linkage, select [Do not link automatically] in the [Automatic Linkage] tab of the
[ScanSnap Manager - Preferences] dialog box.
Configuring ScanSnap Manager (for Windows Users)
"Right-Click Menu (Windows)" (page
274