Fujitsu ScanSnap S1100 Operator's Manual page 311

7.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
Load another document in the ScanSnap when you want to scan multiple sheets.
Scanning starts automatically when a document is loaded.
8.
Press the [Scan/Stop] button on the ScanSnap to finish scanning.
When you perform a scan with [JPEG(*.jpg)] selected for [File format] in the [File
option] tab of the ScanSnap setup window, a PDF file is created from the JPEG file.
A separate PDF file is created for each JPEG file.
The following window is displayed when the PDF file is being created.
If the [Convert to Searchable PDF] checkbox is selected in step 3., text recognition is
performed according to the [OCR options] settings in the [Scan to Evernote -
Options] window.
The following window is displayed during text recognition.
Text recognition will be performed if there are any pages containing text which is not yet
recognized. Note that text recognition will be performed on all pages, including pages
containing text on which text recognition has already been performed.
311
Actions (for Mac OS users)